Agromehanika AGT 106, Руководство по эксплуатации

Страница: 230 / 245

OPERATING INSTRUCTIONS AGT 1060 Rev.09/2020
229
Fig. 249
9.4 WEIGHTS
This table shows the type and the amount of weights, which can be installed to improve the
stability of the tractor and to increase the traction power when using heavy implements.
Weight
type
Weight
material
Mass
(kg)
Installation position Fastening
Amount
of
weights
Total
amount
of
weights
on the
tractor
Maximum
total weight
on the
tractor (kg)
Wheel
weight
Grey cast
iron (SI)
48
Wheel 29x12.50-15
Rim centre
(4 bolts)
1 2 / 4
96 - 192
Wheel 31x15,50-15
(400/50-15)
1 2 / 4
40
Wheel 7.5-16 1 2 / 4
80 - 160
Wheel 260/70 R16 1 2 / 4
Wheel 280/70 R16 1 2 / 4
Wheel 250/80 R18 1 2 / 4
Wheel 280/70 R18 1 2 / 4
Wheel 300/65 R18 1 2 / 4
Wheel 260/70 R20 1 2 / 4
DO NOT install wheel weights on one side only because this would compromise the stability of
the tractor. The weights must be installed according to the system laid down in the table.
Installation
position Wheel
Front axle 1 and 2
Rear axle 3 and 4
Both axles 1, 2, 3, 4
WARNING: To maintain the stability of the tractor, ALWAYS remove weights
when disconnecting the implement. If you leave the weights installed after
disconnecting the implement, the tractor may become unstable.
WARNING: Install the same amount of weights on both sides to ensure the
tractor is properly balanced!