Agrisem 5 Series Скачать руководство пользователя страница 96

Страница: 96 / 130

User manual - Maximulch - Series 3 | Series 5 | Series 6

Servicing - Maintenance

NOTT-GB-708-A

06/12/2019

8. Servicing - Maintenance

8.1. Maintenance tips

8.1.1. Introduction

Comply with the safety instructions regarding servicing and maintenance. The machine has been designed

and built for maximum yield, profitability and comfort under many different usage conditions. It has been

checked at the factory and by the dealer before its delivery to ensure that the machine is received in perfect

condition. To maintain it in good working condition, it is important that servicing and maintenance operations

are performed at the recommended frequency.
In order to ensure that the machine always operates correctly and to obtain an optimum performance, it must

be cleaned and maintained at regular intervals. The hydraulic components and bearings must not be cleaned

with a high-pressure washer or directly hosed down. The housings, screwed connectors and bearings are not

watertight to VERY high pressure cleaning.

8.1.2. Personal protective equipment (PPE)

CAUTION

The maintenance operations involve the handling of loads and materials requiring the wearing

of personal protective equipment.
This personal protective equipment must be worn while performing maintenance operations.

Risk

Examples of personal protective equipment

Cuts

Gloves

Crushing

Gloves, safety shoes, safety helmet

Hydrocarbons

Gloves

Dust

Mask

Noise

Ear protection

8.1.3. Shutting-down the machine

WARNING

Before performing any maintenance operation, the machine's hydraulic, mechanical and

electrical power must be shut down. Chock the machine and take all of the necessary measures

to avoid the accidental movement of the machine

8.1.4. Cleaning the machine

WARNING

Before performing any maintenance operations, the machine must be cleaned to prevent any

risk of accidental injury.

Содержание 5 Series



































































































































Результаты поиска

Содержание 5 Series

Отзывы:

Agrisem 5 Series, Руководство пользователя, Страница: 96 / 130

Результаты поиска

Содержание 5 Series

Отзывы: