Agrisem 5 Series Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 130

Agrisem 5 Series Скачать руководство пользователя страница 102

User manual - Maximulch - Series 3 | Series 5 | Series 6

Servicing - Maintenance

102

NOTT-GB-708-A

06/12/2019

-

Always fit hydraulic hoses in such a way that in all operating conditions:

•  They are not subject to tension other than that caused by their own weight.
•  There is no crushing over short lengths.
•  There are no external mechanical stresses on the hydraulic hoses.
•  Avoid hoses rubbing against parts of the machine or against each other by arranging and attaching

them correctly. Protect hydraulic hoses with protective sheaths if necessary. Cover parts with sharp

edges.

• The authorised bending radii are not exceeded.

-

If hydraulic hoses are connected to moving parts, measure the length of the hose to ensure that the total

range of movement is no less than the smallest authorised bending radius and/or that the hose is not

subject to tension.

-

Attach hydraulic hoses at the locations provided for this purpose. Avoid mountings that may hinder the

natural movement of the hose and modifications to its length.

WARNING

Hydraulic hoses must not be painted.

Marking of hydraulic hoses

Hoses must be replaced after 6 years from their date

of manufacture.
The hydraulic hoses have markings indicating their

year of manufacture.

No.

Description

1

Month of manufacture

2

Year of manufacture

3

Batch no.

NOTT-0359

102018 (LOT 171106)

1

2

3

Fig. 94

8.4.2. Check the lighting and signalling system

Always check that your lighting system is in full working order and clean before driving on the road.

WARNING

Never set out on the public highway if one of these elements is not in good condition.

Replacing bulbs:
1 - Unscrew the protective glass.
2 - Remove the faulty bulb.

«
...
100
101
102
103
104
...
»

Содержание 5 Series



































































































































Отзывы:

Нет отзывов