Agrisem 5 Series Скачать руководство пользователя страница 78

Страница: 78 / 130

User manual - Maximulch - Series 3 | Series 5 | Series 6

Operation

NOTT-GB-708-A

06/12/2019

6.12. Adjusting the clod-breaking board

For Maximulch Series 3 machines only

Some Maximulch models may be fitted with a clod-

breaking board (1).
The clod-breaking board is located between the two

rows of discs. It is designed to break clods.

The adjustment of the board may be fine-tuned

according to the conditions of use.
1 - Remove the screws (2) at each end of the board.
2 -

Set the deflector to the required position.

3 - Retighten the screws (2).

NOTT-0296

Fig. 75

6.13. Adjusting the border spreading disc

For Maximulch Series 3 machines only

The machine can be fitted with a border spreading

disc to prevent a ridge forming when working.

NOTT-0297

Fig. 76

The border spreading disc must be folded for

transport.

NOTT-0302

Fig. 77

Содержание 5 Series



































































































































Результаты поиска

Содержание 5 Series

Отзывы:

Agrisem 5 Series, Руководство пользователя, Страница: 78 / 130

Результаты поиска

Содержание 5 Series

Отзывы: