Agrisem 5 Series, Руководство пользователя, Страница: 71 / 130

User manual - Maximulch - Series 3 | Series 5 | Series 6
Operation
71
NOTT-GB-708-A
06/12/2019
No. Description
a Upper stop setting
b Lower stop setting
A Min. spacing between rollers and discs
B Max. spacing between rollers and discs
1 to 15 Working depth adjustment range from 1
to 15 cm
The lowest position - position (1) - corresponds to a
minimum working depth.
The highest position - position (15) - corresponds to a
maximum working depth.
Position (A) corresponds to the position of the roller
relative to the Maximulch. This is the position in which
the roller kit and the rear row of discs are the closest.
This is the standard mounting of a roller kit on a
Maximulch.
Position (B) corresponds to the position in which
the roller is the furthest away for greater distance
between the roller kit and the rear row of discs.
Positions (C) and (D) correspond to the bottom roller
stop. This allows you to limit the travel of the roller
arm between the lower and upper stops.
NOTT-0285
MULTISTOP
a
b
Fig. 60
NOTE
A Maximulch works at shallow depth (between 2 and 6 cm) thanks to a high travel speed
(approx. 12 kph).
6.9.2. Depth adjustment of blades
The working depth of the blades can be adjusted manually or hydraulically without altering the working depth
of the discs.
DANGER
Switch off the tractor engine and engage the parking brake before carrying out any work on
the Maximulch.
WARNING
Check that the tool is correctly hitched and is perfectly horizontal during work, sideways and
crossways.
WARNING
Check that the is no-one within the area of movement of the blade.