Agrisem 5 Series, Руководство пользователя, Страница: 35 / 130

User manual
Safety instructions
35
ChC_Safety_B-GB
06/12/2019
When driving on the public highway
Observe with the highway code applicable in your country.
Before going out onto the public highway, check the dimensions of the machine and unbolt or remove elements
that exceed its regulatory dimensions.
Take into account the widths authorised for transport and the transported height depending on the hitched
machine, in line with current legislation.
Take account of a higher centre of gravity with a vertically folding machine. The stability of the whole unit will
be different in the folded up position and the folded out position and you should adapt your driving accordingly.
Before setting off on the road, ensure that the hitched machine is fitted with the lighting and signalling devices
required by the highway code and any other devices required by the current regulations.
AGRISEM INTERNATIONAL rear signalling lights and panels may be removed when working. Check that this
signalling equipment has been correctly refitted before driving on the road.
Check that the equipment is clean and in good working order. Replace any missing or damaged equipment
before driving on the road.
Users must not consume alcohol, medication or any other products that will affect their faculties of perception,
leading to a loss of alertness or coordination. A user who takes prescription or non-prescription drugs should
seek medical advice regarding their ability to safety operate a machine.
Before travelling on the road, secure all of the machine's pivoting parts in their transport position to avoid
dangerous changes of position. Also check that the screws, nuts and bolts are tightened and that all of the
machine parts are correctly attached and cannot move or become detached.
If the machine is a folding machine, the locking system must be engaged.
Follow the instructions in this manual on how to prepare the machine for transport.
If necessary, also check:
- the connection of the supply pipes,
- the braking system and the hydraulic circuit.
Ensure that no movement can be made involuntarily.
If the equipment does not already have them, fit signalling devices: lighting board, reflectors, reflective plates
or adhesive strips. The signalling devices must be clean, legible and in good condition. If this is not the case,
contact the AGRISEM INTERNATIONAL customer service department in order to replace them.
Ensure that the machine or additional equipment does not hide the tractor’s lights.
Ensure that the inflation pressure of the tractor tyres is correct and suitable for the situation.
Never drive at more than 25kph when under load.
Clean off any soil stuck to the machine before taking to the road.
After using the public highway, ensure that the road is cleaned of any mud left by the tractor and tools.
The driver/owner has sole responsibility when transporting the machine on the public highway. Always abide
by the applicable regulations and legislation.
5.1.5. Instructions to be followed when performing operations on the machine
These instructions in particular relate to cleaning, servicing and repair operations.
Follow the recommendations relating to the maintenance of the machine contained in this user manual.
Before carrying out any work on the machine
Before carrying out any work on the machine, ensure that it cannot be accidentally started.
- Take care to ensure that the machine is placed on stable ground.