Agrisem 5 Series, Руководство пользователя, Страница: 27 / 130

User manual
Safety instructions
27
ChC_Safety_B-GB
06/12/2019
List of compatible AGRISEM INTERNATIONAL machines
•
Combiplow: Disc-O-Mulch / Maximulch / Actimulch
• DSF: Disc-O-Mulch / Maximulch / Actimulch
• DSA: Disc-O-Mulch / Maximulch / Actimulch
• DS500/200: Disc-O-Mulch / Maximulch / Actimulch
- Modifications made to the machine without the written permission of AGRISEM INTERNATIONAL.
- Fitting of spare parts, accessories or equipment on the machine which are not genuine or which have not
been recommended by AGRISEM INTERNATIONAL. Spare parts are available via the online spare parts
catalogue (accessible via http://parts.agrisem.com/) or through your approved customer service network.
- Failure to monitor the wear parts on the machine.
- Use of the machine other than for the purposes specified by the manufacturer.
- Non-compliant repair and maintenance.
- Catastrophes resulting from the presence of foreign bodies, unforeseeable circumstances and cases of
force majeure.
Similarly, in addition to the other cases referred to in this manual, any claim under the warranty relating to
damage resulting from one or more of the above-mentioned causes shall be excluded.
5.1.2. Instructions to be followed before using the machine
Wear close-fitting clothes. Loose clothing may become caught in moving parts.
Wear the appropriate personal protective equipment (PPE) for the tasks to be performed (gloves, shoes,
goggles, helmet, ear protection, etc.).
Be aware that tillage equipment, even if not very wide, has very sharp parts (blades, shares, discs, etc.) which
can cause serious injury in the event of an accident.
Operate the controls with care.
Before each use, check the area around the machine, no-one must be within 50 metres of the machine. Check
that there is sufficient visibility to ensure this condition of use.
Before carrying out any work, ensure that weight distribution on the tractor ensures a stable assembly. The
tractor must be sufficiently ballasted at the front to avoid any risk of the front lifting. If not, add weights to the
front of the tractor.
Check before each use that screws, nuts and bolts are correctly tightened in accordance with the maintenance
operation described in this manual. Re-tighten if necessary.
No-one must be within 50 metres of the machine during folding and unfolding operations.
Check that the machine is correctly hitched.
Always install the pins and locking systems.
Check that the machine meets personal safety requirements.
Whenever you use the machine, check that the safety and protection devices (safety devices, emergency stop,
wheel chock, extinguisher) are in place and working. Replace any worn or damaged safety guards immediately.
Move any people or animals likely to be in the area where the machine is being manoeuvred or used. A
50-metre safety zone must be kept clear around the machine.
Go around the machine looking for any external damage and checking the condition of the protection devices.
The protection devices must be clean, legible and in good condition. If this is not the case, contact the
AGRISEM INTERNATIONAL customer service department in order to replace them.
Only persons authorised by the owner of the machine and who have been trained and instructed are allowed
to work on and with this machine. The operator is liable towards third parties while working on and with the
machine.
Do not use the machine on very uneven or steeply sloping ground.
Do not use the machine in the event of thunderstorms and lightning.