Agrisem 5 Series, Руководство пользователя

Страница: 101 / 130

User manual - Maximulch - Series 3 | Series 5 | Series 6
Servicing - Maintenance
101
NOTT-GB-708-A
06/12/2019
Maintenance operations to be carried out after each pressure wash
Lubricate the machine.
Maintenance operations to be carried out 100 hours or every 12 months
Wear rings
Maintenance operations to be carried out every 6 years
Replace the hydraulic hoses.
8.4. Maintenance operations
8.4.1. Check the hydraulic lines
Inspection criteria for hydraulic hoses
CAUTION
For your own safety, comply with the following inspection criteria.
If one of the following faults is observed, immediately change the hydraulic hose:
- Deterioration of the outer layer down to the lining (e.g. friction points, cuts, splits).
- Embrittlement of the outer layer (formation of cracks on the outer layer).
- Distortions which do not correspond to the natural shape of the hose or pipe, whether or not they are under
pressure or bent (e.g. separation of the layers, bulges, crushed areas, bending).
- Areas that are leaking.
- Damaging or distortion of the end fitting (affecting its leak tightness). Slight superficial damage does not
warrant replacement.
- Hose becoming detached from the end fitting.
- Corroded end fitting leading to reduced solidity and function.
- Non compliance with mounting specifications.
- Exceeding of the 6-year usage period. The following information is vital: the date of manufacture of the
hydraulic hose marked on the end fitting, to which you must add 6 years. If the date of manufacture
indicated on the connector is "2004" the usage period will end in February 2010.
Fitting and removing hydraulic hoses
WARNING
When fitting and removing hydraulic hoses, the following instructions must be strictly adhered
to:
- Only use genuine AGRISEM INTERNATIONAL hydraulic hoses.
- Always ensure cleanliness.