Agrisem 5 Series Скачать руководство пользователя

Страница: 23 / 130

User manual

Warranty

ChC_Warranty_A-GB

19/11/2018

4.1.4. Preconditions

The machine must be maintained and used in accordance with the instructions in this user manual.
All of the safety measures described in the user manual and in the manuals of any additional equipment must

be complied with.
All protection and safety components are to be inspected regularly and replaced if necessary, including

cylinders, hydraulic hoses, spring and turbo safety devices. refer to the chapters “Safety instructions” and

“Servicing - Maintenance”.
The warranty is only applicable if the customer has complied with the general obligations of the contract and,

in particular, the payment terms.

4.1.5. Pre-delivery inspection

When supplying a machine, the dealer is required to perform a number of operations. These involve, firstly,

a complete inspection of the machine prior to delivery so that the machine is supplied ready for immediate

use. They also involve providing comprehensive training to the purchaser regarding the basic principles of

machine operation and servicing. This training covers the instruments and controls, routing servicing and

safety instructions. All those who will be involved in the use and the servicing of the machine are required to

attend this training.

4.1.6. Warranty exclusions

The warranty will not apply:

If the faults are due to normal wear, incorrect use, lack of maintenance, inadequate monitoring or

negligence.

If the machine is damaged by an accident or develops a fault due to being used for purposes other than

those specified by AGRISEM INTERNATIONAL.

In the event of improper use of the machine. Please refer to the chapter “Intended use of the equipment”,

page 9 regarding this point.

If the manufacturer's instructions and requirements given in this manual are not complied with, particularly

those regarding safety, assembly, start-up, use, operation and servicing.

In the event of improper handling on the part of the user.

Causes due to the passage of foreign bodies.

In the event of damage due to the machine being combined with other machines or instruments without

the prior written agreement of AGRISEM INTERNATIONAL, and/or without complying with the instructions

given by the manufacturers of the tractor and other instruments or machines.

In the event that the machine is used with improperly attached or non-functioning protection and safety

devices.

If the machine has been modified without prior written permission from AGRISEM INTERNATIONAL, or if

spare parts, accessories or equipment have been fitted to the machine which were not recommended by

AGRISEM INTERNATIONAL.

In the event of non-compliant repair.

In the event of damage during transport or handling by a carrier. The recipient shall be responsible for

taking any corrective action against the carrier.

The harmful consequences of the immobilisation of the instrument due to a fault or incident on the machine

are not covered by the warranty.

Personal injury to the owner or a third party and the indirect consequences resulting therefrom are not

covered by the warranty.

Moreover, AGRISEM INTERNATIONAL shall not be liable for the payment of compensation for any reason

whatsoever in the event of the loss of crops or any damage whatsoever due to a fault, hidden defect or

machine breakdown.

Содержание 5 Series



































































































































Результаты поиска

Содержание 5 Series

Отзывы:

Похожие инструкции для 5 Series

Бренды по названию

Популярные бренды

Agrisem 5 Series, Руководство пользователя

Результаты поиска

Содержание 5 Series

Отзывы:

Похожие инструкции для 5 Series

Бренды по названию

Популярные бренды