AGRI EASE BE-TMS Series, Руководство по эксплуатации и запасным частям

Страница: 7 / 32

BE-TMSXXXX USER MANUAL
7
GENERAL SAFETY AND ACCIDENT PREVENTION STANDARDS
Level of danger
The safety of the operator and exposed persons is the main concern of the designer and the manufacturer
of the machine. When designing a new machine, one tries to plan for all possible danger situations and risks
connected to using the machine, adopting the steps necessary to make the equipment as safe as possible.
The number of accidents remains very high however, especially due to incautious and awkward use of the
machine. It is therefore recommended to carefully read this manual and this section in particular, regarding
safety standards, avoiding behavior that is inappropriate or in contrast with the instructions contained in this
manual.
Pay attention to the following danger signal were contained in this manual and follow safety instructions.
DANGER
Indicates a hazardous situation which, if not followed, will result in serious injury or death.
WARNING
Indicates a hazardous situation which, if not avoided, could result in serious injury or death.
CAUTION
Indicates a hazardous situation which, if not followed, could result in minor to moderate injury.
Terminology
The indicated levels of danger refer to specific risk situation that may occur during machine use and may
involve the same machine, the operator and any exposed persons (according to Directive 2006/42/EC).
With the purpose of highlighting situations or operations that may result in risks, the meanings of terms
used in this manual are indicated here:
• HAZARDOUS AREA: Any area in and/or around a machine where the presence of an exposed person
constitutes a risk to the health and safety of said person. (Attachment I, Point 1.1.1., Letter b), Directive
2006/42/EC).
• EXPOSED PERSON: A person fully or partly in a hazardous area (Attachment I, Point 1.1.1., Letter c),
Directive 2006/42/EC).
• OPERATOR: The person or personnel in charge of the installation, the operation, the adjusting, the cleaning,
the repairing and the moving of the machine. (Attachment I, Point 1.1.1., Letter d), Directive 2006/42/EC).
• USER: the person, entity or company, who purchased or rented the machine and intends to use it according
to the intended use foreseen by the manufacturer.
• SPECIALIZED PERSONNEL: any person specifically trained and approved to carry out maintenance or
repair interventions that require particular knowledge of the machine, its operation, the installed safety
devices, intervention modes. It must be capable of recognizing danger present on the actual machine,
therefore avoiding at risk situations.
• RISK: a combination of the probability and seriousness of injury or damage to health which can arise in a
dangerous situation.
• GUARD: a part of the machine that is used to specifically guarantee protection by way of a material barrier.
• PROTECTION DEVICE: a device that reduces risk (unlike the guard) either on its own or together with the
guard.
• INTENDED USE: the use of the machine in accordance with the information provided in the operating
instructions.
• REASONABLY FORESEEABLE MISUSE: the use of the machine different to the information provided in the
operator’s instructions, which may be the result of readily predictable human behavior.
• AUTHORIZED ASSISTANCE CENTRE: The Authorized Assistance Centre, legally authorized by the
Manufacturer, is formed by specialized staff able to carry out all types of assistance, maintenance and
repair work, even of a certain complexity, required to maintain the machine in perfect working order.
WARNING
Carefully read the following rules. If the instructions described are not followed, a situation may arise
which causes irreparable damage to the machine or property, or injury - even severe - to people or
animals.