AGRI EASE BE-TMS Series Скачать руководство пользователя страница 8

Страница: 8 / 32

BE-TMSXXXX USER MANUAL

Braber declines all responsibility for damage caused by not complying with the safety and injury prevention

regulations described below. Braber also declines any responsibility for damage caused by improper use of

the machine and/or as a result of modifications made without authorization by the manufacturer.

Danger plates and warning

The Mulcher is equipped with pictograms (labels) warning about residual risks present on the machine that it

was not possible to eliminate. Figure 3 specifies the meaning of symbols contained in the pictograms.
The operator must memorize the meaning of the symbols. The labels should always be kept clean and

replaced immediately if they are fully or partially detached or damaged.

Plates with indications and particular warnings for

maintenance and a correct use of some parts of the machine.
The respect of these plates lengthens the duration and the

efficiency of the Mulcher.

Check the oil level the first time the machine is used.

Indicates the correct functioning of the Cardan shaft.

Keep clear from the moving machine; Keep at a safe distance.
Do not approach moving parts.

Содержание BE-TMS Series

































Результаты поиска

Содержание BE-TMS Series

Отзывы:

Похожие инструкции для BE-TMS Series

Бренды по названию

Популярные бренды

AGRI EASE BE-TMS Series, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание BE-TMS Series

Отзывы:

Похожие инструкции для BE-TMS Series

Бренды по названию

Популярные бренды