AGRI EASE BE-TMS Series, Руководство по эксплуатации и запасным частям

Страница: 14 / 32

14
BE-TMSXXXX USER MANUAL
WARNING
The machine must be lifted with maximum care and by using lifting devices suitable for the weight and size
of the same.
WARNING
Due to the danger of this operation, it must be performed by expert and responsible personnel. For the
lifting device to be used it is mandatory to comply with the safety regulations prescribed by the laws in force
in the country where the machine is used.
Do not touch the Mulcher and do not stop within the operating range of the crane.
After transportation, remove the protection film and check that the machine was not damaged
in any way. Braber cannot be held responsible for any damage caused by handling carried out any differently
from that described in the manual.
First Use
DANGER
Connecting the Mulcher to the agricultural tractor is a very dangerous phase.
Ensure you carry out the entire operation in strict compliance with the instructions.
The Mulcher features a multiplier with a 1” 3/8 spline power takeoff that can be adapted to any agricultural
tractor PTO with a cardan shaft.
Upon the first installation, simply remove the machine from the packaging and set it up correctly.
The installation, adjustment and testing of the Mulcher involve hazardous operations. Carefully read all the
instructions described in this manual. If in doubt, contact the Manufacturer directly.
In any case, before commissioning the Mulcher, immediately after transport, check that the supply is
intact and complete. The Mulcher can be installed and subsequently removed from the agricultural tractor
according to the requirements of the user.
DANGER
Braber cannot be held liable for damage to persons, animals or property, caused by non-compliance with the
safety and accident prevention regulations or operations which do not conform to the information provided
in the user and installation instructions.
Prior to installation
Before installing the Mulcher it is advisable to check the suitability, good condition and adjustment of the
agricultural tractor on which it will be installed:
• Begin by first checking the power in kW or hp and the minimum mass required of the agricultural tractor.
They must match the minimum characteristics stipulated by the Manufacturer of the Mulcher, which are
indicated in this manual in the paragraph “1.8. Technical data”;
• Move the tractor to the place where the Mulcher was deposited after being transported and stop it in a safe
and practical position for assembly to be performed on level ground;
• Lift the Mulcher with a lifting device of adequate capacity and move the machine near the rear part of the
tractor, in line with the three-point hitch support. Move the tractor in reverse to attach the equipment to it;
WARNING
Due to the danger of this operation, it must be performed by expert and responsible
personnel. Do not touch the Mulcher and do not stop within the operating range of the lifting device.