background image

© 2019 AGM Global Vision. All rights reserved worldwide.

This documentation is subject to change without notice.
No parts of this manual, in whole or in part, may be copied, photocopied, translated, or transmitted 

by any electronic medium or in machine-readable form without the prior written permission of 

AGM Global Vision.

If you have questions that are not covered in this manual, or need service, contact AGM Global 

Vision customer support for additional information prior to returning a product.

AGM Global Vision

173 West Main Street
PO Box 962
Springerville, AZ 85938
Tel. 928.333.4300
Fax 480.393.4882
[email protected]
www.agmglobalvision.com

EXPORT INFORMATION

Buyer acknowledges that all products supplied by AGM Global Vision are subject to U.S. export control laws, 

including, but not limited to, the Export Administration Regulations, the International Economic Emergency 

Powers Act, and various U.S. embargoes and sanctions. AGM Global Vision products may not be exported, 

re-exported, or transferred contrary to U.S. export control laws. In particular, AGM Global Vision products may 

not be exported, re-exported, or transferred to prohibited countries, individuals, organizations, or entities, 

including but not limited to those individuals and entities listed on the List of Specially Designated Nationals 

and Blocked Persons administered or maintained by the U.S. Office of Foreign Assets Control (“OFAC”), the 

various lists maintained by the Bureau of Industry and Security of the Department of Commerce, and the U.S. 

State Department and Buyer represents and warrants that neither Buyer nor any of its officers, directors, or 

employees are on such lists. Distribution or resale by Buyer to such countries, individuals, organizations, or 

entities is expressly prohibited. Buyer has and will maintain a positive process to ensure compliance with this 

Section.

2020.02.17

Содержание ANACONDA Series









































Отзывы: