AGM Global Vision ANACONDA Series, Руководство пользователя

Страница: 28 / 40

28 AGM Global Vision
NOTE:
After configuration is complete, select EXIT on the MAIN MENU and push the OK button to leave
the MAIN MENU. All settings will be saved.
11. To align the barrel of the weapon, place the reticle on the desired target. To allow for the bullet’s
travel (i.e. bullet drop, windage, and the target mobility), adjust the boresight of the day scope.
12. To operate the Anaconda with wireless remote control, turn the function switch to the STB
position (Standby). After it the Remote Control button can activate/ deactivate the device in two
ways:
1) To turn the device on, press the remote control button once, to turn it off – press the button
again.
2) To operate the device in short-time activation mode (see note below), press and hold the
remote control button down for 1.5+ seconds. Release the remote control button to deactivate
the device.
CAUTION:
DO NOT leave the equipment activated when not in use.
2.3.2 ANACONDA SHUT-DOWN
NOTE:
Shut down the Anaconda to properly to avoid losing unsaved settings and data.
Shutdown the Anaconda as follows:
1. Be sure to save your settings and data.
2. Turn off the Anaconda.
3. Replace the cap on the objective lens.
4. Disconnect the cable (if applicable).
5. Place the cap on the connector.
6. Dismount the Anaconda from the weapon.
7. Remove the batteries.
CAUTION:
Do not store the Anaconda with the batteries still installed.
8. Store the Anaconda and all accessories in the carrying case.