AGM Global Vision ANACONDA Series, Руководство пользователя

Страница: 26 / 40

26 AGM Global Vision
The TOP MARGIN function allows to move the display up/down by a fixed number of pixels.
The FACTORY DEFAULTS function resets the Anaconda to factory defaults.
The SETTINGS menu also includes factory software revision information under FW: (software
version is shown in alpha-numeric format).
> EXIT
RIFLE PROFILE
STANDARD
LEFT MARGIN
TOP MARGIN
FACTORY DEFAULTS
FW:
(factory software revision)
SETTING
FIGURE 2-26. SETTINGS MENU
NOTE:
After configuration is complete, select EXIT on the MAIN MENU and push the OK button to leave
the MAIN MENU. All settings will be saved.
2.3 OPERATING PROCEDURES
2.3.1 OPERATING
WARNING:
Always make sure your firearm is unloaded before you place the equipment on the firearm.
Always verify that the chamber is empty, especially if you stop the procedure and resume later.
Safe handling rules should be followed at all times.
CAUTION:
DO NOT force the equipment controls past their stopping points.
CAUTION:
To prevent thermal damage to the equipment, never point it (either ON or OFF) directly at the sun
or any other source of high intensity light that the unprotected human eye cannot tolerate (such
as a welding arc). To prevent accidental exposure to these sources, never leave the equipment
around without first securing the objective lens cap.
Operating procedures are as follows:
1. Remove the Anaconda from the carrying case.
2. Install the Anaconda on the weapon with a day scope. Refer to Parts 2.1.2-2.1.4 for installation
procedures.
3. Verify that the Anaconda is securely mounted to the weapon or scope.