AGM Global Vision ANACONDA Series, Руководство пользователя

Страница: 15 / 40

15 Anaconda
USER MANUAL
2.1.4 INSTALLING THE ANACONDA TC50-640 ON THE LENS OF A DAY SCOPE
Use the optional Scope Mounting System (SMS) to install the Anaconda TC-50-640 onto day
scope lenses.
NOTE:
The adapters differ in attaching diameters and must fit with the day scope parameters specified
in Table 5-7 (Scope Mounting Systems Data).
NOTE:
The Anaconda cannot be attached to scopes that include focus rings on the housing of the
objective lens.
CAUTION:
Scope Mounting Systems are not recommended for installing the Anaconda on firearms with
dynamic recoil (0.308 Win or stronger).
Figure 2-6 shows the Anaconda TC50-640 installed on the lens of a day scope.
Install the Anaconda on the lens of a day scope as follows (refer to Figure 2-7):
1. Using a 2.5 mm Allen key, unscrew the M4×8 screws securing the Anaconda mount. Remove the
mount from the seating rail and place it, along with the screws, into the storage case.
2. Take off the output lens cap and put it into the storage case.
3. With the nut (B) loosened, place the insert (C) into the SMS’s clamp (A).
4. Screw the SMS into the Anaconda’s output lens thread.
5. With the nut (B) loosened, slide the Anaconda with the SMS onto the lens of the day scope as far
as it goes.
6. Tighten the nut (B) using a screwdriver.
FIGURE 2-7. SCOPE MOUNTING SYSTEM
A
F
E
D
B
C
FIGURE 2-6. THE ANACONDA INSTALLED ON THE LENS OF A DAY SCOPE