Agilent Technologies N5230-60102, Установочная инструкция

Страница: 13 / 18

Installation Note N5230-90004 13
Step 6. Replace the Lower Front Panel Overlay
Refer to Figure 7 for this procedure. New parts are listed in Table 1 on page 4 .
1. From the back side of the front panel, use a blunt object in one of the cutouts in the lower
frame to push the overlay (item
①
) and separate it from the front panel.
2. From the front side of the front panel, pull off the overlay completely and discard it.
3. Remove any adhesive remaining on the front panel.
4. Remove the protective backing from the new front panel overlay (item
①
).
5. Starting from either the left or right side, loosely place the overlay in the recess on the
lower front panel, ensuring that it fits tightly against the edges of the recess.
6. Once the overlay is in place, press it firmly onto the frame to secure it.
Figure 7 Lower Front Panel Overlay Replacement
NOTE
The figure above shows the N5230A front panel and floppy disk drive. The
N5230C front panel has a slightly different appearance and does not
include a floppy disk drive.