Agilent Technologies N5230-60102, Установочная инструкция

Страница: 4 / 18

4 Installation Note N5230-90004
Items Included in the Upgrade Kit
Check the contents of your kit against the following list. If any part is missing or damaged,
contact Agilent Technologies. Refer to
“Contacting Agilent” on page 3 .
Table 1 Contents of Upgrade Kit N5230-60102
Ref
Desig.
Description Qty
Part
Number
Installation note (this document) 1 N5230-90004
A25,
A26
0–60 dB step attenuator 2 33321-60065
Machine screw, M3 x 10, pan head (to attach attenuators) 4 0515-0374
Ribbon cable, A25 step attenuator to A16 test set motherboard P510 1 8121-0819
Ribbon cable, A26 step attenuator to A16 test set motherboard P512 1 8120-5537
Cable tie (to secure cables W47 and W51 to the side frame) 6 1400-0249
Lower front panel overlay (for configurable test set) 1 N5240-80002
W40 RF cable, A19 SSLAM to A25 port 1 step attenuator 1 N5240-20023
W41 RF cable, A19 SSLAM to A26 port 2 step attenuator 1 N5240-20024
W42 RF cable, A25 port 1 step attenuator to PORT 1 SOURCE OUT 1 N5240-20021
W43 RF cable, A26 port 2 step attenuator to PORT 2 SOURCE OUT 1 N5240-20022
W44 RF cable, PORT 1 CPLR THRU to A21 test port 1 coupler
2 N5240-20013
W45 RF cable, PORT 2 CPLR THRU to A22 test port 2 coupler
W46 RF cable, A19 SSLAM (R1) to REFERENCE 1 SOURCE OUT 1 N5240-20034
W47 RF cable, A19 SSLAM (R2) to REFERENCE 2 SOURCE OUT 1 N5240-20036
W48 RF cable, A21 test port 1 coupler to PORT 1 CPLR ARM 1 N5240-20011
W49 RF cable, A22 test port 2 coupler to PORT 2 CPLR ARM 1 N5240-20012
W50 RF cable, PORT 1 RCVR A IN to A20 mixer brick (A) 1 N5240-20009
W51 RF cable, REFERENCE 1 RCVR R1 IN to A20 mixer brick (R1) 1 N5240-20017
W52 RF cable, REFERENCE 2 RCVR R2 IN to A20 mixer brick (R2) 1 N5240-20018
W53 RF cable, PORT 2 RCVR B IN to A20 mixer brick (B) 1 N5240-20010
W60 Front-panel jumper 6 08720-20098