G4208A User’s Guide
127
4
Running Multiple-Vial Analyses
Re-calibrating With Multiple Groups of Standards
4
Move to the End of sequence list, select the
Wizard
and enter:
5
Select
Calibration
to display the Calibration Settings screen.
6
Change the settings according to
Figure 84
Sequence Calibration Wizard
7
You may press
Preview
to view the result.
8
Select
Done
to accept entries.
9
Move to the End of sequence list and press
Insert
.
10
Select
Method
and then move to METH2 and press
Load
.
11
Move to the End of sequence list, select the
Wizard
and enter:
12
Select
Calibration
to display the Calibration Settings screen.
Vial Range
7 to 12
#Inj.
1
Vial Range
13 to 21
#Inj.
1
NOTE
You have to insert METH2/METH3 before/after each calibration sample line(s).
Use copy/paste or use insert/parameter/stoptime and only one method.
