G4208A User’s Guide
46
1
Start-up Information
Maintenance Information
Maintenance Information
1
To view/change the Maintenance information, press
More
from the
Welcome
screen and select
Maintenance
from the menu.
Figure 26
Maintenance Screen
The
Maintenance System
screen shows a list of all modules in the system with
their names, product and serial numbers, and the firmware revision.
2
You can update the firmware using
Update Wizard
, which allows updating all
modules of the system at once, or using
Single
to update a selected module.
The firmware must be on an inserted and activated USB Flash Drive in its root
directory.
On the module- specific screens you can
•
see the Early Maintenance Feedback (EMF), error and maintenance
events,
•
“Early Maintenance Feedback (EMF)”
•
do module maintenance (e.g. calibrations),
•
add maintenance activities into the permanent log,
•
identify the module in the stack (flashing LED).
NOTE
The Instant Pilot provides basic maintenance and diagnostic functions only. The
Agilent LabAdvisor software provides the full maintenance and diagnostic
capabilities.
update a single module
update a set of modules
to change the product number
or serial number after main
board exchange
leave this screen
system or module specific
information
