Agilent Technologies GS8210, Руководство по программированию, Страница: 230 / 352

5-172 N9360A Multi UE Tester GSM Programming Manual
5
Programming Command Reference
Command Reference for Peak TX Power/Burst Timing/Power Ramp
Measurement Screen
These commands are used to set the controls and parameters
associated with the TX Analyzer graph screen.
Power Ramp Template
TXANalyzer:RAMP:MASK:PCS NARRow|RELaxed
TXANalyzer:RAMP:MASK:PCS?
This command sets template type of Power Ramp measuremnt
for PCS1900. The parameter is
NARRow
or
RELaxed
. At preset,
this is set to
NARRow
. If
RELaxed
is set, the template is selected
same one for DCS1800. This setting is initialized to
NARRow
at
power on.
Peak TX Power Measurement
TXANalyzer:RESults:TXPower?
This query command returns the Peak TX Power measurement
result values
<int 1>
,
<int 2>
and
<real 3>
. Each value is
separated by a comma.
•
<int 1>
(1 digit) is
0
if measurement result is within the
measurement range, or
1
if measurement result is out of
range or the Peak TX Power is not measured.
•
<int 2>
(1 digit) is the test result for the
0
(pass) or
1
(fail).
•
<real 3>
(up to 5 letters) is the measured data ranging
from
-99.9
to
99.9
in
dBm
. If measurement result is out of
range or the Peak TX Power is not measured, the value
-99.9
is returned.