Agilent Technologies GS8210, Руководство по программированию, Страница: 192 / 352

5-134 N9360A Multi UE Tester GSM Programming Manual
5
Programming Command Reference
The step in execution is set to
1
, and the others are set to
0
. The
value in the parentheses is decimal value for each bit. Refer to
Setting and Querying the Registers on page 4-18 .
•
<int 2>
contains total results of the measurement. The
returned value is
0
(Test result available: only passed items),
1
(Test result available: including failed items) or
2
(None).
TESTs:MANual:SIGNaling:STATe:EXPand?
This query command returns test content and system type
currently being executed with integer value of
<int 1>
and
<
int 2>
. Each value is separated by a comma.
•
<int 1>
contains test contents currently being executed in
GPRS/EGPRS mode. The following 7-bit values are returned.
bit 0 (1): Attach
bit 1 (2): Attached
bit 2 (4): Connected
bit 3 (8): Timeout Error
bit 4 (16): NA
bit 5 (32): NA
bit 6 (64): Processing …
The step in execution is set to
1
, and the others are set to
0
. The
value in the parentheses is in decimal value for each bit. Refer
to
Setting and Querying the Registers on page 4-18 .
• <int 2> contains the system currently being executed. The
return value is
1
(W-CDMA),
0
(GSM) or
2
(CDMA2000).
N O T E
If the mode is set to GSM, this command is invalid.
N O T E
If the mode is set to GSM, this command is invalid.