Agilent Technologies Auroraduet N1726A Скачать руководство пользователя страница 73

Страница: 73 / 507

aurora

Duet

- User Guide

3 - 8

422685

Choosing the Device to Emulate

You need to identify the type of device which aurora

Duet

to emulate at the selected interface. This automatically
determines whether aurora

Duet

generates or receives the

network clock at Layer 1.

Highlight

MODE

in the

EMULATION

screen.

Using the

LEFT

and

RIGHT

arrow keys, toggle

between the available options.

The

NT / LT

LED lights up, depending on your

selection.

The options are as follows:

Termination Settings

Terminal Equipment. aurora

Duet

acts as the network clock

receiver at Layer 1.

Network Termination. aurora

Duet

acts as the network clock

generator at Layer 1. On the U interface,

aurora

Duet

acts as the

network clock receiver at Layer 1.

(BRI) Line Termination (U interface).

aurora

Duet

acts as the network

clock generator at Layer 1.

Notes

When you choose TE, aurora

Duet

sets the L2 protocol

to Slave (see

Identifying the Protocol Master and

Slave

in this Section), and if you choose NT or LT,

the L2 protocol is set to Master. This is the normal
configuration, but you can change this setting, e.g.
for testing fixed links or stress testing.

MODE

is set to TE. NT cannot be selected.

The conventional terms 'TE' 'NT' and 'LT' are used

for consistency with other protocols, although they
are not relevant for QSIG - see

Notes for QSIG

Users

in Chapter 1 Section 2.

Chap3s1.PM6

17/06/99, 09:36

Содержание Auroraduet N1726A




























































































































































































































































































































































































































































































































Результаты поиска

Содержание Auroraduet N1726A

Отзывы:

Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 73 / 507

Результаты поиска

Содержание Auroraduet N1726A

Отзывы: