Agilent Technologies Auroraduet N1726A Скачать руководство пользователя страница 171

Страница: 171 / 507

aurora

Duet

- User Guide

4 - 30

422685

ISDN Call Information

CPN

Called Party Number and sub-address (if used) that the

caller dialled.

CLI/COL

For an incoming call, the Calling Line Identity (CLI) is

displayed - this is the number of the calling party. For an

outgoing call, the COL (Connected Line Number) is

shown - this is the number of the connected party. It may

be different from the CPN dialled, if the call was

redirected.

UUI

User to User Information. Any UUI1 text sent with the

call is shown here. For details on the types of User to

User Information, see Section 4 of this Chapter.

Rx Charge

Tx Charge

Charging advice for the call is displayed - this updates

automatically as charging advice is received. The display

indicates whether the received charging is in units (UNIT)

or currency (CURR)- see

Advice of Charge (AOC)

in Section

4 of this Chapter.

Cause

The last received ISDN cause code. When there is a call

currently connected, this is always blank.

Display IE

contents

The last received Display Element is shown on the bottom

lines of the screen. A maximum of 100 characters is

displayed.

ISDN Call Information

Destination address and Network Address Extension (if

used) that the caller dialled.

OLI

Originating Line Identity (OLI). This is the originator's line

identity number.

Rx Charge

Charging advice for the call is displayed - this updates

automatically as charging advice is received.

Last Rcvd

Msg

The last message received by aurora

Duet

SIS

The last Supplementary Information String

MIM

Maintenance Information Message.

Chap4s1.PM6

17/06/99, 09:42

Содержание Auroraduet N1726A




























































































































































































































































































































































































































































































































Результаты поиска

Содержание Auroraduet N1726A

Отзывы:

Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 171 / 507

Результаты поиска

Содержание Auroraduet N1726A

Отзывы: