Agilent Technologies Auroraduet N1726A Скачать руководство пользователя страница 272

Страница: 272 / 507

Issue 01 - 06/99

5 - 33

Monitoring the Line - Section 2

To Start Scanning

Press

START

to begin scanning.

aurora

Duet

begins the scan, monitoring each selected

channel in turn for the number of seconds you have
specified (see

Setting the Channel Scan Time

). While the

scan is in progress, aurora

Duet

displays the channel screen.

The channel currently being scanned is highlighted.

When aurora

Duet

has finished scanning a channel, the

channel box indicates the results of the scan. For details
of the results, see

Understanding the Scan Results

later in

this Section.

Stopping the Scan Part Way Through

To stop the scan before it finishes and display the results
for the channels that have been tested:

Press

EXIT

aurora

Duet

stops scanning. The screen displays the results

for the channels that have been scanned. For details, see

Understanding the Scan Results

Any channels which you had selected for scanning, but
which had not been scanned at the time you stopped the
test, are marked with a cross.

Understanding the Scan Results

When aurora

Duet

has finished scanning a channel, the

results of the scan are displayed in the channel box in
symbol form, as follows:

Channel had data activity which matched at least

one of the protocols for which aurora

Duet

was

scanning. You can display a list of the protocols
which have been detected - see the following for
details.

Chap5s2.PM6

17/06/99, 09:47

Содержание Auroraduet N1726A




























































































































































































































































































































































































































































































































Результаты поиска

Содержание Auroraduet N1726A

Отзывы:

Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 272 / 507

Результаты поиска

Содержание Auroraduet N1726A

Отзывы: