Agilent Technologies Auroraduet N1726A Скачать руководство пользователя страница 26

Страница: 26 / 507

Issue 01 - 06/99

1 - 13

Welcome to aurora

Duet

- Section 2

Liquid Crystal Display (LCD).

This is a backlit screen,

suitable for use in low light conditions, with contrast
control.

Note

For information about the Headset, see

Communications

Ports and Connectors

, later in this section.

The Keypad

The following describes each one of aurora

Duet

s keys:

Function keys.

There are six of these keys which activate

functions related to the current operation.

Cursor pad.

Use this key to move the cursor

DOWN

LEFT

RIGHT

. To move the cursor a single step, press

and release; to 'auto-repeat', hold the arrow down.

Use the

and

DOWN

arrows to move the cursor

between menu options. The current selection is displayed
in reverse video (light text on a black background). At
the top of a menu, press

to bring the cursor to the

bottom; at the bottom of a menu, press

DOWN

to bring

the cursor to the top. This does not apply to the Main
menu, which has a scroll bar.

Use the

LEFT

and

RIGHT

arrows to toggle between

available options, or to move the cursor to the start or
end of a line where you can enter data. Use the

LEFT

arrow to erase characters in text entry screens. You can
also use the cursor keys to move around the Graphical
User Interfaces (GUIs).

Contrast.

Use this key to adjust the contrast of

aurora

Duet

's screen. Press and hold to sweep through the

available contrast range. Release the key to choose your
preferred setting.

Chap1s2.PM6

17/06/99, 09:34

Содержание Auroraduet N1726A




























































































































































































































































































































































































































































































































Результаты поиска

Содержание Auroraduet N1726A

Отзывы:

Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 26 / 507

Результаты поиска

Содержание Auroraduet N1726A

Отзывы: