Agilent Technologies Auroraduet N1726A Скачать руководство пользователя страница 436

Страница: 436 / 507

Issue 01 - 06/99

A2 - 19

Appendix 2 - Call Clearing Cause Codes

Resources unavailable, unspecified

This cause is used to report a network resource
unavailable event only when no other cause in the
network congestion class applies.

Incoming Call barred within CUG

Bearer capability not authorised

The user has requested a bearer capability which
is implemented by the equipment generating this
cause, but the user is not authorised to use it.

Bearer capability not presently available

The user has requested a bearer capability which
is implemented by the equipment generating this
cause, but which is not available at this time.

Service or option not available, unspecified

This cause is used to report a service or option
not available event, only when no other cause in
this class applies.

Bearer capability not implemented

The equipment sending does not support the
bearer capability requested.

Channel type not implemented

The called party has reached a channel type that
is not supported.

Only restricted digital information bearer
capability is available

The user has requested an unrestricted bearer
service, but the equipment sending this cause only
supports the restricted version of the service.

Appx2.PM6

17/06/99, 09:55

Содержание Auroraduet N1726A




























































































































































































































































































































































































































































































































Результаты поиска

Содержание Auroraduet N1726A

Отзывы:

Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 436 / 507

Результаты поиска

Содержание Auroraduet N1726A

Отзывы: