manualshive.com logo in svg

Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 365 / 507

Поделиться
Скачать
Agilent Technologies Auroraduet N1726A Скачать руководство пользователя страница 365

aurora

Duet

 - User Guide

7 - 58

422685

Simple Fault Finding Tests

You can use the following tests to determine whether
your modem is operating correctly, and to test the
various connections. These tests should be performed
from the Windows 

HyperTerminal

 (Windows 95 & NT)

or 

Terminal 

(Windows 3.1).

Test 1

A simple way of checking that your modem is operating
correctly is to:

Ø

Enter the Attention command (AT).

The modem should respond with the message 'OK' or '0'
(assuming result codes are enabled,  which is normally
the default). If the modem does not respond, ensure it is
powered on and check the physical connections between
it and the DTE.

Test 2

To test the connections between the modem and the
DTE, perform the following steps:

Ø

Turn on the modem's speaker so you can hear the

dial tones. For example, give the command
ATM2L3.

Ø

Give the modem the tone dialling command

followed by a sequence of digits. For example,
ATDT1234567

You should now hear tones in the speaker as they are
dialled. If you do not, there may be a problem with the
connection between the modem and the DTE or the
telephone line.

Test 3

To quickly check the telephone line:

Chap7s3.PM6

17/06/99, 09:52

58

Содержание Auroraduet N1726A




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов