Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 184 / 507

Issue 01 - 06/99 4 - 43
Testing in Simulate Mode - Section 2
A flashing cursor indicates where you can enter the first
digit and aurora
Duet
enters edit mode. In edit mode the
function keys become the six hexadecimal digits:
F1 = A, F2 = B, F3 = C, F4 = D, F5 = E and F6 = F .
Ø Enter a custom BERT pattern, using the keypad to
enter digits 0 to 9 and the function keys to enter
hexadecimal digits A to F.
The new pattern must consist of two groups of two
hexadecimal digits (that is, any hexadecimal numbers in
the range
00 00 to FF FF ).
Once you have entered four valid digits, edit mode is
exited.
Choosing the length of the test
Ø Highlight TEST LENGTH and use the LEFT and
RIGHT arrow keys to toggle between the available
options:
BERT Test Length
Continuous The test runs until you stop it
1 Min The test runs for 1 minute
15 Mins The test runs for 15 minutes
1 Hour
The test runs for 1 hour
User Def Lets you set a custom test length. See below for details.
To specify a user defined test length:
Ø Set TEST LENGTH to USER DEF .
If a user defined TEST LENGTH already exists, it is
displayed.
Ø Press F3 EDIT .
A flashing cursor indicates where you can enter the first
digit and aurora
Duet
enters edit mode.
Chap4s2.PM6 17/06/99, 09:42 43