Agilent Technologies Auroraduet N1726A, Руководство пользователя, Страница: 190 / 507

Issue 01 - 06/99 4 - 49
Testing in Simulate Mode - Section 2
Stopping the test
You can stop a BER test at any time. You might do this,
for example, to stop a continuous BER test.
Ø Choose CONNECT MENU / DISCONNECT BERT.
The BER test ends and the results are stored.
Clearing the call and stopping the test
To clear the call, stop the BER test and store the results:
Ø Choose CLEAR CALL.
The call clearing cause code is displayed and the STATUS
line displays CLEARED . Press F6 EXIT to return to the
Main menu.
2
Note
If there is an incoming Clear Call request, aurora
Duet
stops
the test, stores the results and displays the call clearing
cause code.
Viewing Stored BERT Results
aurora
Duet
can store up to 30 BER test results in memory.
Once 30 sets of results have been stored, aurora
Duet
overwrites the oldest set with any subsequent results.
To view stored BERT results:
Ø From the Main Simulate menu, choose RESULTS.
The most recent results are displayed first. A screen
similar to the following is displayed:
Chap4s2.PM6 17/06/99, 09:43 49