Agilent Technologies Agilent 33500 Series, Руководство пользователя

Страница: 169 / 278

168
Chapter 3 Features and Functions
System-Related Operations
3
• If you delete an arbitrary waveform from non-volatile memory after
storing the instrument state, the waveform data is lost and the
function generator will not output the waveform when the state is
recalled. The built-in “exponential rise” waveform is output in place of
the deleted waveform.
• An instrument reset does not affect the configurations stored in
memory. Once a state is stored, it remains until it is overwritten or
specifically deleted.
• Front-Panel Operation : Press and then select the
Store/Recall
softkey. You can then perform several operations:
To save a state , press
Store State
, enter the desired name with the
knob and arrows, and then press
Store State
. The state file will be
automatically created with the .sta extension.
To recall a preciously saved state file , press
Recall State
. Use the
knob and arrows to browse to the desired file (note that the right
arrow expands a folder). Then press
Select
.
To delete a stored state , select the
Delete State
softkey, use the
browser to select the .sta file, and then press
Select
.
To configure the waveform generator to recall the factory default
state at power-on, press
and then select the
Store/Recall
softkey. Then toggle the
Power On
softkey as necessary to select
Factory
. To configure the waveform generator to recall the power-
down state when power is restored, toggle the
Power On
softkey as
necessary to select
Last
. This will recall state “0,” as described above.
Remote Interface Operation: To configure the waveform generator to
automatically recall the power-down state when power is restored,
send the following command.
MEMory:STATe:RECall:AUTO ON