Agilent Technologies 8163B Скачать руководство пользователя страница 67

Страница: 67 / 466

Using the System Utilities

Additional Information

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

Figure 29 Editing the Date and the Time

Use the cursor key to move to the Date field. Press the [Edit] softkey. The day of
the month is highlighted.

Use the left and right cursor keys to move to the day, month or year. Edit the day,
month or year using the cursor key. Press Enter.

Perform steps 3 to 4 again if the date is not fully correct.

Use the cursor key to move to the Time field. Press the [Edit] softkey. The hour
of the day is highlighted. The 24-hour clock is used.

Use the left and right cursor keys to move to the hour, minute, or second. Edit the
hour, minute, or second using the cursor key. Press [OK].

Perform steps 6 to 7 again if the date is not fully correct.

When the time and date are both correct, press [Close] to return to the
configuration menu.

Содержание 8163B



















































































































































































































































































































































































































































































Результаты поиска

Содержание 8163B

Отзывы:

Agilent Technologies 8163B, Руководство пользователя, Страница: 67 / 466

Результаты поиска

Содержание 8163B

Отзывы: