Agilent Technologies 8163B Скачать руководство пользователя страница 342

Страница: 342 / 466

Specifications and Regulations Compliance

Agilent 8166B Specifications

342

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

Agilent 8166B Specifications

The Agilent 8166B Lightwave Multichannel System displays 17 channels.

[1]

Modules designed for the 8153A Lightwave Multimeter are NOT

compatible with the Agilent 8166A/B Lightwave Multichannel System.

[2]

For code compatibility to the 8153A Lightwave Multimeter please refer

to the mainframe’s Programming Guide, part number 08164-90B61.

Display

Graphical color display 300

240 points visible.

Display Resolution (Power Meters)

0.0001 dB/dBm, 0.01 pW to 10 pW (depending on power
range), up to 6.5 digits (user definable).

Compatibility

The Agilent 8166A/B supports all Agilent 8163A/B Series
modules.

[1]

Environmental

Storage temperature

Operating temperature

Humidity

-40° C to +70° C

0° C to +45° C

<95% R.H. from 0° C to +45° C

Power

AC 100 - 240 V ± 10%, 50 - 60 Hz, 450 VA max.

Dimensions

240 mm

430 mm

580mm (9.5"

17"

23")

Weight

net 23 kg (50.7 lbs); shipping 45 kg (94.8 lbs)

GPIB interface

Function code

All modes and parameters accessible via GPIB interface

SH1, AH1, T6, L4, SR0, RL1, PP0, DC1, DT0, C0.
SCPI standard;

[2]

GPIB Interface Performance

max. 300 kB/s (burst data rate during read of 12001 points
from a power meter).

Trigger

True synchronous on all channels

Trigger Bandwidth

max. 100 kHz for triggering, and
max. 1 MHz (50% duty cycle) for external digital modulation.

RS232C Interface: max. baud rate

115200 bps

Parallel Printer Interface

Centronics

Number of Modules

17 Modules

Содержание 8163B



















































































































































































































































































































































































































































































Результаты поиска

Содержание 8163B

Отзывы:

Agilent Technologies 8163B, Руководство пользователя, Страница: 342 / 466

Результаты поиска

Содержание 8163B

Отзывы: