Agilent Technologies 8163B Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 466

Agilent Technologies 8163B Скачать руководство пользователя страница 38

Getting Started

Agilent 8166A/B Lightwave Multichannel System

38

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

Agilent 8166A/B Lightwave
Multichannel System

Figure 5 The Agilent 8166A/B Lightwave Multichannel System Mainframe

The Agilent 8166A/B Lightwave Multichannel System has 17 slim module
slots.

The system can host up to seventeen front-loadable modules, of any
combination of the following types:

• compact Tunable Laser modules, such as the the Agilent 81689A,

• fixed wavelength Laser Sources, such as the Agilent 81650A,

• DFB Source modules, such as the Agilent 81662A

• Power Sensors, both dual and single, such as the Agilent 81635A,

• Fast Power Sensor Modules, such as the Agilent 81637B,

• Interface Modules for Optical Heads, such as the Agilent 81618A,

• Return Loss Modules, such as the Agilent 81610A

• Attenuator Modules, such as the Agilent 81570A

• Optical Switch Modules. such as the Agilent 81591B

The front-loadable module slots do not support any modules designed for
the 8153A Lightwave Multimeter, that is, modules with part numbers less
than 81600.

«
...
36
37
38
39
40
...
»

Содержание 8163B



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов