Agilent Technologies 8163B Скачать руководство пользователя страница 202

Страница: 202 / 466

Setting Attenuation and/or Power Levels

How to Use a Variable Optical Attenuator module

202

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

How to Control the Shutter

The optical path of the Attenuator module is controlled by a shutter, which you
can use both for protection purposes or to simulate channel drops.

When the shutter is open, the green LED on the attenuator module’s front panel is
lit.

The Enable button

Press the Enable button, located on the front panel of the Attenuator module, to

toggle the shutter state.

The On/Off Softkey

Press the [On/Off] softkey to toggle the shutter state.

The menu item <Output State>, and the parameter [Output], is functionally
equivalent to the [On/Off] softkey.

Output at Startup

To select the shutter state at startup:

Press the [Menu] softkey.

Use the Cursor key to highlight <Output at Startup>, then press Enter.

Select <Off > or <On>.

Press [OK], then press [Close].

Remote Interlock

The Attenuator module’s shutter state is protected by mainframe’s Remote
Interlock (RIL) feature. The shutter cannot be opened if the 50

Ω

resistor is

removed from the RIL connector on the back panel of the mainframe. See “

The

Remote Interlock (RIL) connector

” on page 311.

Содержание 8163B



















































































































































































































































































































































































































































































Результаты поиска

Содержание 8163B

Отзывы:

Agilent Technologies 8163B, Руководство пользователя, Страница: 202 / 466

Результаты поиска

Содержание 8163B

Отзывы: