Agilent Technologies 4395A, Ручное изменение

Страница: 529 / 575

D
Manual Changes
Introduction
This appendix contains the information required to adapt this manual to earlier versions or
congurations of the analyzer than the current printing date of this manual. The information
in this manual applies directly to the 4395A Network/Spectrum Analyzer serial number prex
listed on the title page of this manual.
Manual Changes
T o adapt this manual to your 4395A, see T able D-1 and T able D-2, and make all the manual
changes listed opposite your instrument's serial number and rmware version.
Instruments manufactured after the printing of this manual may be dierent from those
documented in this manual. Later instrument versions will be documented in a manual
changes supplement that will accompany the manual shipped with that instrument. If your
instrument's serial number is not listed on the title page of this manual or in T able D-1 , it may
be documented in a yellow MANU AL CHANGES supplement.
In additions to change information, the supplement may contain information for correcting
errors (Errata) in the manual. T o keep this manual as current and accurate as possible ,
Agilent T echnologies recommends that you periodically request the latest MANU AL CHANGES
supplement.
F or information concerning serial number prexes not listed on the title page or in the
MANU AL CHANGE supplement, contact the nearest Agilent T echnologies oce .
Turn on the line switch or execute the *IDN? command by GPIB to conrm the rmware
version. See the GPIB Command R eference manual for information on the *IDN? command.
T able D-1. Manual Changes by Serial Number
Serial Prex or Number Make Manual Changes
JP1KE
T able D-2. Manual Changes by Firmware V ersion
V ersion Make Manual Changes
Manual Changes D-1