Agilent Technologies 34410A, Руководство пользователя

Страница: 83 / 144

34410A/11A User’s Guide 83
Features and Functions 2
System-Related Operations
The utility menu accesses the following system–related operations:
self–test, display of error conditions, calibration, and instrument
information. These features are described in the subsections that follow.
The utility menu is
also
used to access the following three menus:
•
REMOTE I/O
menu ( see “Remote Interface Configuration Methods” on
page 86 for a complete description of the remote interface features ).
• STORE/RECALL menu (see “Multimeter State Storage” on page 51 for a
complete description of the state storage feature) .
• MISC SETTINGS
menu (
see “Miscellaneous Configuration Settings”
on
page 62
for a complete description of these features
).
Self
–
Test
A power – on self – test occurs automatically when you turn on the
instrument. This limited test assures you that the multimeter is
operational. This self–test does not perform the extensive self test
described below.
A complete self–test performs a series of internal tests, and takes
approximately 5 seconds to execute.
If the power–on or complete self–test fails, an error is stored in the error
queue. See the
Agilent 34410A/34411A Service Guide for more information
on returning the instrument to Agilent for service.
•
Following the complete self–test, the instrument issues a Factory Reset
(
*RST ) command.
• Front Panel Operation: Press to display UTILITY MENU . Press
as needed until SELF TEST is displayed, and press to initiate the
self–test procedure. If the test fails, the Error annunciator will light.
•
Remote Interface Operation:
The following command returns ”+0” if the
self– test is successful or ”+1” if it fails.
*TST?
Refer to the Agilent 34410A/34411A Programmer’s Reference for
complete description and syntax for this command.