Agilent Technologies 34410A, Руководство пользователя

Страница: 77 / 144

34410A/11A User’s Guide 77
Features and Functions 2
Trigger Slope
You may select whether the multimeter uses the rising edge ( POS ) or
falling edge ( NEG ) of the applied external trigger signal to trigger a reading,
or (independently) for the resultant voltmeter complete signal. The default
for both is NEG .
•
Front Panel Operation:
To select the trigger slope for external triggering,
press to display
TRIGGER
. Press or as needed
to display
ADVANCED,
and press . Press or as needed to
select
EXT:TRG SLOPE
, and press . Press or as needed to select
NEG or POS
, and press .
VM:COMP SLOPE
will be displayed.
Then, to select the slope for the voltmeter complete signal, press or
as needed to select NEG or POS , and press . Then step through or
exit the configuration menu.
• Remote Interface Operation:
The following command selects the trigger slope
for the external terminal:
TRIGger:SLOPe {POSitive
>
NEGative}
The following query returns the selected trigger slope for the external
terminal:
TRIGger:SLOPe?
This query returns POS or NEG .
The following command selects the signal slope for the voltmeter
complete signal:
OUTPut:TRIGger:SLOPe {POSitive
>
NEGative}
The following query returns the selected trigger slope for the external
terminal:
OUTPut:TRIGger:SLOPe?
This query returns
POS
or
NEG
.
Refer to the Agilent 34410A/34411A Programmer’s Reference for
complete description and syntax for this command.