manualshive.com logo in svg

Agilent Technologies 16196A, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Agilent Technologies 16196A Скачать руководство пользователя страница 5

4

 

Certification

Agilent Technologies certifies that this product met its published specifications at the time 
of shipment from the factory. Agilent Technologies further certifies that its calibration 
measurements are traceable to the United States National Institute of Standards and 
Technology, to the extent allowed by the Institution’s calibration facility or by the 
calibration facilities of other International Standards Organization members.

Documentation Warranty

The material contained in this document is provided "as is," and is subject to being 
changed, without notice, in future editions. Further, to the maximum extent permitted by 
applicable law, Agilent disclaims all warranties, either express or implied with regard to 
this manual and any information contained herein, including but not limited to the implied 
warranties of merchantability and fitness for a particular purpose. Agilent shall not be 
liable for errors or for incidental or consequential damages in connection with the 
furnishing, use, or performance of this document or any information contained herein. 
Should Agilent and the user have a separate written agreement with warranty terms 
covering the material in this document that conflict with these terms, the warranty terms in 
the separate agreement will control.

Exclusive Remedies

The remedies provided herein are buyer’s sole and exclusive remedies. Agilent 
Technologies shall not be liable for any direct, indirect, special, incidental, or 
consequential damages, whether based on contract, tort, or any other legal theory. 

Assistance

Product maintenance agreements and other customer assistance agreements are available 
for Agilent Technologies products.

For any assistance, contact your nearest Agilent Technologies Sales and Service Office. 
Addresses are provided at the back of this manual.

Содержание 16196A

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды