AGI WHEATHEART X130 Скачать руководство пользователя

Страница: 7 / 46

31025 R0

2.3. Additional Safety Information

This manual is a supplement to the Series Operator Manual. Please ensure that you have read
and understood that manual.

2.4. Rotating Flighting Safety

• KEEP AWAY from rotating flighting.

• DO NOT remove or modify flighting guards, doors, or covers.

Keep in good working order. Have replaced if damaged.

• DO NOT operate the X-Tend hopper without all guards,

doors, and covers in place.

• NEVER touch the flighting. Use a stick or other tool to

remove an obstruction or clean out.

• Shut off and lock out power to adjust, service, or clean.

2.5. Rotating Parts Safety

• Keep body, hair, and clothing away from rotating pulleys,

belts, chains, and sprockets.

• Do not operate with any guard removed or modified. Keep

guards in good working order.

• Shut off and remove key or lock out power source before

inspecting or servicing machine.

2.6. Guards Safety

• Keep guards in place and do not operate unless all guards are in place.

• Do not walk on, step on, or damage guards.

• Lock out power before removing a guard.

• Ensure all guards are replaced after performing maintenance.

X-TEND HOPPER – X130

2. SAFETY

Содержание WHEATHEART X130















































Результаты поиска

Содержание WHEATHEART X130

Отзывы:

Похожие инструкции для WHEATHEART X130

Бренды по названию

Популярные бренды

AGI WHEATHEART X130, Руководство оператора и сборки

Результаты поиска

Содержание WHEATHEART X130

Отзывы:

Похожие инструкции для WHEATHEART X130

Бренды по названию

Популярные бренды