AGI WHEATHEART X130, Руководство оператора и сборки

Страница: 33 / 46

31025 R0 33
Use SAE multi-purpose high-temperature grease with extreme pressure (EP) performance. SAE multi-purpose
lithium-based grease is also acceptable.
6.3. Service Interval
6.3.1 Weekly Service
Complete the following maintenance weekly when using the X-Tend hopper.
Grease and Lubrication
• Grease the hopper u-joints — (2 locations)
• Grease the collector swivel ring u-joint — (1 location)
• Lubricate the drive spline — Lightly coat the spline shaft with grease or spray lube
Figure 14. X-Tend Hopper Grease and Lubrication Points
Check Chain Tension
• Check hopper drive chain tension — See Section 6.4. – Adjusting the Hopper Drive Chain Tension on page 35
• Check wheel drive chain tension — See Section 6.5. – Adjusting the Wheel Drive Chain Tension on page 37
• Check swing auger drive chain tension — See Section 6.6. – Swing Auger Chain Tension on page 38
X-TEND HOPPER – X130 6. MAINTENANCE