AgfaPhoto AS1150, Руководство пользователя

Страница: 38 / 212

10
EN
Power Cycling
If a problem occurs that cannot be corrected with
the instructions in this user manual (see also the
help below), follow the steps given here.
1 Press the reset button on the underside of the
device with a straightened paper clip.
2 If the problems repeats, please contact our
technical customer service or your retailer.
Problems Solutions
The device cannot be switched on Check that power supply or the USB cable is con-
nected to the device properly.
The device feels warm • After a certain period of operation, the surface
reaches approx. 30°C to 45 °C. This is normal.
If an unusual smell comes from the device or
the surface becomes too hot, disconnect the
scanner immediately from the power supply
and/or the computer / digital photo frame.
Lines are present on the scanned picture or the im-
age is not sharp • Check whether the document is dirty or
scratched.
• Check whether the protective cover used is
dirty or scratched.
• Clean and calibrate the scanner if it has not
been used for a longer period.
With scanned images, parts of the image are cut
off. • The scanner is equipped with a function for au-
tomatic cutting off of black edges. With small
images, the image is only saved without the
edge.
When using this function, cutting off of impor-
tant picture information can occur with images
with a black background (e.g. night shot).
In this case, rotate the image and scan it again.
The document is stuck in the feeder • Press the button
h
.
The document is automatically ejected.