3
n
n
THIS APPLIANCE MUST ONLY BE INSTALLED
BY COMPETENT ENGINEERS WHO HAVE BEEN
SPECIFICALLY FACTORY TRAINED ON THE PRODUCT
AND WHO HAVE THE APPROPRIATE EQUIPMENT.
Any alteration that is not approved by AGA could invalidate
the approval of the appliance, operation of the warranty and
could affect your statutory rights.
With specific exceptions, the installing of any type of AGA
cooker is subject to the respective directions contained in
the current issue of the Building Regulations. In addition,
planning permission may need to be obtained, which should
be applied for separately.
The installation of the appliance must be in accordance with
the relevant requirements of the IET Wiring Regulations and
Building Regulations. It should be in accordance also with any
requirements of the local authority.
In your own interest, and that of safety to comply with the
law. all appliances should be installed by an authorised AGA
engineer or distributor, in accordance with the relevant
regulations.
2. Introduction
Delivery Requirements
•
The AGA TC3 arrives on 1 pallet
•
The AGA TC5 (Hotcupboard Option) arrives on 2 pallets.
There must be access to the kitchen to manipulate a foot
print of 1005mm x 740mm. A wooden template (skate with
castor wheels) of dimensions 1005mm x 740mm could be
used to check if the AGA Total Control fully built appliance is
able to fit through the property grounds and doors into its
installation position in the kitchen. It must also be considered
that the height of the appliance is 960mm off pallet and
1100mm on the pallet, so high level obstacles/restrictions
must not be overlooked.
If this skate/template can be manipulated through the
property grounds and doors into position, then the AGA
can be installed as intended with no re-work.
Содержание TC3G
Страница 4: ......
Страница 19: ...15 7 Circuit Diagram AGA TC3 DESN 517487...