AGA TC3G, Руководство по установке

Страница: 12 / 24

8
Hotcupboard TC5
n n
THE HOTCUPBOARD ATTACHMENT REQUIRES
A INDEPEDENT SINGLE PHASE POWER
SUPPLY.
n n
WARNING: THIS APPLIANCE MUST BE
EARTHED.
n n
THIS APPLIANCE IS DESIGNED FOR THE
VOLTAGE STATED ON THE RATING PLATE,
WHICH IS SITUATED ON A SLIDE-OUT TRAY IN
THE HOTCUPBOARD BASE PLATE ABOVE THE
PLINTH.
A 230v ~ 50 Hz, 3 amp fused electrical supply is required
adjacent to the appliance. External wiring to the unit must be
installed using a 3 core silicon - SIHF insulation cable and in
accordance with the current wiring regulations and any local
regulations which apply.
The method of connection to the mains electricity supply
must facilitate complete electrical isolation of the appliance,
preferably by a fused double pole switch, having a contact
separation of at least 3mm in both poles.
The mains connection point must be accessible within the
areas shown in Fig. 4.4 for cable routing options.
The isolator should not be positioned immediately above
the hotcupboard, but must be fitted with 2 metres of the
appliance
Fig. 4.4
.
Fig. 4.3
Fig. 4.4
DESN 516446
Mains cable fed from control tray
left or right exit through ducting
dependent upon position of supply
socket.
Hotcupboard
Power Supply
DESN 516447