AGA GATEMASTER 900 HD, Руководство по установке

Страница: 20 / 23

20
THE AGA GATEMASTER 900 AUTOMATIC SWING GATE SYSTEM
Control Board Description
1.
2SIDE terminal is used for connecting accessories when the gate is a double gate
2.
COM terminal is COMMON, used for connecting the “ground” or COM connection of
accessories
3.
1SIDE terminal is used for connecting accessories when the gate is a double gate
4.
Swipe Card terminal is used for connecting accessories to open the gate
5.
COM terminal is COMMON, used for connecting the “ground” of external devices
6.
“IR” Infrared terminal is used for connecting the safety photo eye sensor (Typically the
NO wire)
7.
12V DC output is used for connecting photo eye sensor (Continuous output current
<=200mA)
8.
24V battery output is used for connecting the backup b
9.
24V battery output is used for connecting the backup battery -
10.
24V DC output is used for connecting accessories (such as photo eye
sensor, max current output 1A)
11.
GND is used for connecting the “ground” or common of accessories and for a
grounding rod
12.
24V DC lamp output is used for connecting a flashing light +
13.
24V DC lamp output is used for connecting a flashing light -
14.
24V DC lock output — the NF terminal is used for connecting a solenoid lock
15.
CO M is COMMON, used for connecting the “ground” of a solenoid lock
16.
24V DC lock output — the NA terminal which used for connecting the magnetic lock
17.
24V DC alarm output
18.
24V DC alarm output