November 29, 1999
BIT SWITCHES
4-31
Service
Tables
System Switch 13
No
FUNCTION
COMMENTS
0-1
Remaining memory threshold
for activating the Tx/Rx File
Save feature
Bit 1
Bit 0
Threshold
0
0
25%
0
1
50% (default)
1
0
75%
1
1
Not used
If the remaining space in the 40MB memory is
below the threshold value, the Tx/Rx File Save
feature cannot be used. Adjust the threshold
value to meet the customer's requirements.
2
Not used
Do not change this setting.
3-4
Files that can be stored in the
Tx/Rx File Save feature
Bit 1
Bit 0
Files
0
0
All files
0
1
Received files
only
1
0
Transmitted
files only
1
1
Not used
The default setting is (0 0).
Change the settings to limit the file types that
can be stored using the Tx/Rx File Save feature.
5-7
Not used
Do not change this setting.
System Switch 14
No
FUNCTION
COMMENTS
0
to
7
Wait time between pages in
printer mode (with an optional
printer interface unit)
05 to 64 (H) (5 to 100s)
During a printer job, a fax message could come
in while a page from the computer is still being
compiled.
If the timer has not run out yet, the machine will
continue to compile the page from the printer
and the fax message will not be printed.
However, if the timer runs out before the page
has been compiled, all pages of the fax
message will be printed, then the rest of the
waiting print job will be output.
Therefore, with a longer setting, the fax machine
is more likely to wait until the end of print job
output before printing any incoming fax
message. A shorter setting allows the fax
machine to interrupt a print job to print an
incoming fax message.
Default setting: 0A(H) = 10 s
