Afag SE-Power FS, Руководство пользователя

Страница: 29 / 60

SE-Power FS STO-manual vers. 1.6 en.12.08.2015 29
Time Description Value
T_K1 Delay between the switching of S1 and
the closing of the undelayed contact K1

Data sheet for the safety
switching device
T_K1_V Delay between S1 and the opening of
the relapse delayed contact K1 Can be set on the safety
switching device
T_STO-A/B_OFF STO-A/B
– Switching time from High to
Low

Section 9.1.4, Table 21
T_STO-A/B_ON STO-A/B
– Switching time from Low to
High

Section 9.1.4, Table 21
T_DRIVE_V Delay of the SE-Power FS
0 … 10ms
T_DIN5_SU Time for which the DIN5 must be Low
after switching on STO-A/B again and
status change of the STO module

20ms
T_BRAKE_V_ON Switch off delay of the holding brake Dependent of the brake
1)
T_BRAKE_V_OFF Switch on delay of the holding brake Dependent of the brake
2)
1) Physical delay until the brake closes.
2) Minimum time: Physical delay until the brake opens. This time can be parameterised in
the servo drive via a large value.
Table 6: Time data concerning Figure 5