86
14. Following manufactures instructions mount the
motor to the mount. Use the supplied 8-32
mounting bolts to secure the mount to the fire-
wall
15. Adjust the motors position until the thrust
washer is 6 1/2” away from the firewall.
16. Mount the ESC to F1 as shown below. Ensure
that the speed control will receive plenty of air-
flow to keep it from overheating.
17.
Attach the hook side of Velcro to the battery tray
as shown below.
Note:
Attach small pieces of Velcro to fuse sides as
shown. This will help hold the One Wrap
Velcro Straps in place when changing out
the
batteries.
Velcro Strips
Mounting Distance is: 6 1/2”
