55
2. Locate the laser cut engine mounting template
for the DLE-30. If other engines are used the
Universal template may be modified for any
mounting pattern
3. Align cowl to fuse and bolt in place. Mark the
location of the air exit from the fuse onto the
cowling.
This step will help with the proper alignment
of the template material during the cowl instal-
lation steps shown later in this manual
Engine Installation
1. The 30cc Edge 540 will accept a wide range of
engine types. The DLE-30 rear carburetor en-
gine with Pitts style muffler, was mounted and
used for the test flights.
Note:
Mounting hardware is
Not Supplied
.
stand offs available through DLE and should
be supplied with your engine.
Mounting distance from front of firewall to
front of engine prop hub:
6 1/2”
GAS ENGINE INSTALLATION
