48
Engine Installation
1. Gather the items shown below for engine instal-
lation.
◊
Glow engine of your choice
◊
8 - 8-32 bolts
◊
2 - Plywood standoffs
◊
8 - 3.5mm flat washers
◊
4 - 8-32 lock nuts
◊
4 - 8-32 Blind nuts
◊
Note:
A Satio 1.80 4 stroke is shown
depending on the choice of engine the
installation may differ slightly.
4 STROKE ENGINE INSTALLATION
2. Align cowl to fuse and bolt in place. Mark the
location of the air exit from the fuse onto the
cowling.
This step will help with the proper alignment
of the template material during the cowl instal-
lation steps shown later in this manual.
3. Locate the laser cut engine mounting template
for the glow installation. If other engines are
used the Universal template may be modified for
any mounting pattern
